LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Econoline XLT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F) >> Removal & Installation >> Fuel Pump >> Removal

Fuel Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Fuel pump is located behind fuel filter/water separator in between cylinder heads. Remove turbocharger. See TURBOCHARGER .
  2. Remove fuel filter/water separator. See FUEL FILTER/WATER SEPARATOR . Remove fuel pump banjo bolt and seal rings at rear of fuel pump. Remove fuel line assembly-to-cylinder head fittings at rear of each cylinder head. Remove fuel line assembly.
  3. Remove bolts from fuel pump. Remove fuel pump, "O" ring and fuel pump tappet from cylinder block.
CAUTION: Ensure camshaft lobe for fuel pump is on base circle with lobe facing away from fuel pump to prevent damage to fuel pump during installation.