Removal & Installation: Flywheel: Installation

WARNING: This page is about a different variant/trim than selected.

To install, reverse removal procedure. On M/T models, install primary flywheel onto secondary flywheel. Install and tighten secondary flywheel bolts to specification. See TORQUE SPECIFICATIONS . Apply Threadlock® sealant onto threads on flywheel-to-crankshaft bolts before installing.
On all models, install and tighten flywheel-to-crankshaft bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Identifying Dual Mass Flywheel Components (F250 HD, F350 & & F250-F550 Super Duty M/T Models)

Courtesy of FORD MOTOR CO.