Camshaft Specifications

WARNING: This page is about a different variant/trim than selected.

CAMSHAFT

Application

In. (mm)

End Play

.002-.008 (.051-.203)

Journal Diameter

⁽¹⁾

Camshaft Bearing I.D.

2.102-2.105 (53.39-53.47)

Oil Clearance

.002-.006 (.05-.15)

Front Camshaft Bearing Installed Depth ⁽²⁾

.020-.050 (.51-1.27)

Gear Backlash

.010-.0055 (.140-.256)

Camshaft Thrust Plate Thickness

In Thrust Area

.154-.156 (3.91-3.96)

Outside Thrust Area

.149-.157 (3.78-3.98)

⁽¹⁾	Information not available.

⁽²⁾	Specification listed is distance from face of cylinder block to front edge of front camshaft bearing.