LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Econoline XLT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F) >> Engine Oiling >> Oil Cooler Assembly >> Reassembly

Oil Cooler Assembly: Reassembly

WARNING: This page is about a different variant/trim than selected.
  1. Apply engine oil onto NEW "O" rings and "O" ring mating surfaces. Install large "O" rings and then small "O" rings onto oil cooler.
  2. Install oil cooler front and rear headers onto oil cooler. Ensure locating clips align in slots and headers are installed evenly onto oil cooler. Perform oil cooler leakage test to ensure oil cooler is properly sealed.
scientia non olet · About LEMON Manuals