LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Econoline XLT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F) >> Engine Oiling >> Oil Cooler Assembly >> Disassembly & Cleaning

Disassembly & Cleaning

WARNING: This page is about a different variant/trim than selected.
  1. Using soft-faced hammer, tap on oil cooler front and rear headers to loosen "O" rings. Remove oil cooler front and rear headers from oil cooler by using twisting motion.
  2. Thoroughly clean all components with solvent. Ensure oil cooler is thoroughly flushed to ensure all residue is cleaned from oil cooler. Dry components with compressed.
scientia non olet · About LEMON Manuals