Pistons, Piston Pins & Piston Rings Specifications
WARNING: This page is about a different variant/trim than selected.
PISTONS, PINS & RINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Pistons | |||||
| Diameter | 4.1069-4.1076 (104.315-104.333) | ||||
| Clearance | .0045-.0059 (.1143-.1498) | ||||
| Piston Height Above Cylinder Block | .010-.031 (.25-.79) | ||||
| Pins | |||||
| Diameter | 1.3079-1.3081 (33.220-33.226) | ||||
| Piston Fit | .0003-.0007 (.007-.018) | ||||
| Rod Fit | .0004-.0009 (.010-.023) | ||||
| Rings | |||||
| No. 1 | |||||
| End Gap | .014-.024 (.36-.61) | ||||
| Side Clearance | (1) | ||||
| No. 2 | |||||
| End Gap | .062-.072 (1.57-1.83) | ||||
| Side Clearance | .002-.004 (.05-.10) | ||||
| No. 3 (Oil) | |||||
| End Gap | .012-.024 (.30-.61) | ||||
|
|||||