LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation - A/T >> Removal & Installation >> Continental, Sable & TAURUS >> Installation

Continental, Sable & TAURUS: Installation

  1. To install, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS . Install NEW circlip on axle shaft before installing. Fill transaxle with appropriate fluid. See the TRANSMISSION SERVICING - A/T article. DO NOT overfill.
  2. Slightly tighten mount bolts. Repeat procedure for right-side subframe assembly. After both sides are aligned, tighten subframe-to-body mount bolts. Check and adjust axle shaft positioning. See the AXLE SHAFT article in DRIVE AXLES section.
scientia non olet · About LEMON Manuals