LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - Power Integral Rack & Pinion >> Removal & Installation >> Power Steering Pump R & I >> Removal & Installation (Probe 2.5L)

Removal & Installation (Probe 2.5L)

  1. Remove hose hold-down bracket. Disconnect high pressure hose. Raise vehicle. Remove right front tire and splash shield. Remove belt.
  2. Remove pump pulley. See PUMP PULLEY . Disconnect hoses and pressure switch connector. Remove mount bolts and power steering pump. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals