Test D - Rapid Continuous Flashing Air Bag Warning Light/ All Front Impact Sensors Disconnected: Description

An air bag diagnostic monitor which has yet to be powered up in an electrically complete system will remain in assembly plant mode until it is powered up in good system for period of time. While air bag diagnostic monitor is in assembly plant mode: if both front impact sensors are disconnected, the diagnostic monitor will flash AIR BAG warning light continuously at rapid rate; if fault exists in system, DTC will flash on warning light but will not be stored in memory. When air bag diagnostic monitor is not in assembly plant mode: if both front impact sensors are disconnected the air bag diagnostic monitor will store DTCs B1941, B1942, B1944, B1945, and any other applicable fault code.