DTC B1935 - Low Resistance Or Short In Passenger-Side Air Bag Circuit: Description

The air bag diagnostic monitor runs periodic checks on resistance of driver-side and passenger-side air bag module, while ignition switch is in RUN position. Normal resistance from terminal C276-5, circuit 607 (Light Blue/Orange wire) (passenger-side air bag feed) to terminal C276-4, circuit 616 (Pink/Black wire) (passenger-side air bag return) is between 0.9-1.2 ohms. If resistance at these terminals is less than 0.7 ohms, DTC B1935 will be stored in memory and AIR BAG warning light will flash Code 35. If condition is serviced or corrected, DTC B1935 will be stored in memory.