LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System & Engine Component Test - 3.0L >> Engine Sensors & Switches >> Sensors & Switches >> Park/Neutral Position (PNP) Switch

Park/Neutral Position (PNP) Switch

  1. Turn ignition off. Locate PNP switch near transmission shift linkage. Inspect switch and bracket for damage and repair if necessary. Disconnect PNP switch wiring harness connector.
  2. Inspect terminals for damage and repair if necessary. Measure resistance between switch terminals. If resistance is 5 ohms or more, replace PNP switch If resistance is less than 5 ohms, see CIRCUIT TEST TA in TESTS W/CODES - 3.0L article for additional testing procedures.