LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System & Engine Component Test - 3.0L >> Engine Sensors & Switches >> Sensors & Switches >> Clutch Pedal Position (CPP) Switch

Clutch Pedal Position (CPP) Switch

  1. Turn ignition off. Locate CPP switch near clutch pedal. Inspect switch and bracket for damage and repair if necessary. Disconnect CPP switch wiring harness connector. Inspect terminals for damage and repair if necessary.
  2. Measure resistance between switch terminals. If resistance is 5 ohms or more, replace CPP switch If resistance is less than 5 ohms, see CIRCUIT TEST TA in TESTS W/CODES - 3.0L article for additional testing and specifications.
scientia non olet · About LEMON Manuals