LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN [U,1 & 2] >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

  1. To install, reverse removal procedure. Coat seal lip and crankshaft damper surface with engine oil before installing. Use Vibration Damper/Seal Installer (T82L-6316-A) and Seal Installer (T70P-6B070-A) to install seal.
  2. Apply Sealant (D6AZ-19562-BA) to crankshaft damper keyway before installing damper. Use Vibration Damper/Seal Installer (T82L-6316-A) to install damper. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals