LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN [U,1 & 2] >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

Inspect journal diameter, lobe lift, oil clearance and runout. Replace camshaft if not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.

NOTE: Standard and .015" (.38 mm) oversize camshaft bearings are available.
scientia non olet · About LEMON Manuals