LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4N >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN [U,1 & 2] >> Overhaul >> Cylinder Head >> Valve Seat

Valve Seat

Valve seat angle, seat width and seat runout must be within specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. Valve seats must be ground when valve guide is reamed or replaced. Replacement information is not available from manufacturer.

scientia non olet · About LEMON Manuals