LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Steering System - Power Integral Rack & Pinion >> Removal & Installation >> Power Steering Pump R & I >> Removal & Installation (Mustang)

Removal & Installation (Mustang)

  1. Drain reservoir by disconnecting fluid return line at reservoir. Disconnect pressure hose at pump. DO NOT remove fitting from pump. Use Pulley Remover (T69L-10300-B) to remove pulley.
  2. Remove pump mounting bolts. Remove pump. To install, reverse removal procedure. Refill and bleed hydraulic system.
scientia non olet · About LEMON Manuals