Wheel Cylinder: Remove, Install, and Overhaul
WARNING: This page is about the Econoline E150, 4.2 2, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable), bleed System and replace Shoes (if necessary).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Rear,Full Floating Rear Axle,Both | 2.8 | B | ||
| Rear,Full Floating Rear Axle,One Side | 1.5 | B | ||
| Rear,Semi-Floating Rear Axle,Both | 2.2 | B | ||
| Rear,Semi-Floating Rear Axle,One Side | 1.2 | B | ||
| Combination Procedure: OIL SEAL WEAR SLEEVE: Replace: | ||||
| Each | 0.2 | B | ||