LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Contour SE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> Removal & Installation >> Coolant Temperature Gauge >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove instrument cluster. See INSTRUMENT CLUSTER  .
  2. Separate instrument cluster housing from instrument cluster back plate. Remove speedometer and tachometer. See SPEEDOMETER/ODOMETER  and TACHOMETER.
  3. Carefully remove temperature gauge retaining screw and temperature gauge assembly by pulling gauge assembly away from instrument cluster back plate. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals