LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Contour Base, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Caliper & Pads >> Installation

Rear Brake Caliper & Pads: Installation

  1. Using Rear Caliper Piston Adjuster (T87P-2588-A), rotate caliper piston until it is fully seated. Install brake pads on caliper anchor plate. Install caliper bolt and cover. Tighten bolt to specification. See TORQUE SPECIFICATION .
  2. Install guide pin and cotter pin. Install parking brake cable on caliper operating lever, and adjust parking brake by operating parking brake several times. Refill and bleed system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals