LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Aspire 2D Hatchback, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> System Testing >> High Beam Indicator Never/Always On

High Beam Indicator Never/Always On

  1. High Beam Check  - Turn headlights on and check for high beams. If high beams operate properly, go to next step. If high beams do not operate properly, check headlights. See WIRING DIAGRAMS.
  2. Bulb Check  - Turn ignition off. Remove high beam indicator bulb from instrument cluster. Ensure continuity exists between bulb terminals. If continuity exists, go to next step. If continuity does not exist, replace bulb.
  3. Indicator Circuit Check  - Turn ignition off. Disconnect instrument cluster C210 (Black) connector. Turn ignition on. Turn high beam headlights on. Check voltage between instrument cluster connector C210 terminal B2 (Red/White wire) and ground. If voltage is greater than 10 volts, replace instrument cluster printed circuit board. If voltage is not as specified, repair Red/White wire.
scientia non olet · About LEMON Manuals