LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Probe Base, Standard >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - Power Integral Rack & Pinion >> Removal & Installation >> Power Steering Pump R & I >> Removal & Installation (Thunderbird & Cougar, C-II)

Removal & Installation (Thunderbird & Cougar, C-II)

  1. Disconnect negative battery cable. Disconnect power steering return line at oil pan flange reinforcement and drain fluid. Remove power steering pressure hose from power steering oil reservoir fitting. DO NOT remove fitting from power steering pump. Remove mounting bracket.
  2. Disconnect drive belt from pump pulley and remove pump. On 3.8L fixed-pump systems, remove drive bolt form power steering pump pulley. Remove power steering pump pulley. Remove power steering pump. To install pump, reverse removal procedure. Refill and bleed hydraulic system.
scientia non olet · About LEMON Manuals