Activating System (Miata, Millenia, MPV, MX-6, Pickup, Protege & 626)

Ensure negative battery cable is disconnected. Connect Orange and Blue passenger air bag module connectors (if equipped). Install glove box. Connect driver air bag Orange and Blue clockspring connectors. Install lower cover panel. Connect negative battery cable. See SYSTEM OPERATION CHECK .

Fig 1: Locating Driver Air Bag Clockspring Connector (Except RX7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Locating Driver Air Bag Clockspring Connectors (RX7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Locating Passenger Air Bag Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002