LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Probe Base, Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - Power Integral Rack & Pinion >> Removal & Installation >> Power Steering Pump R & I >> Removal & Installation (Taurus & Sable, C-III Pump)

Removal & Installation (Taurus & Sable, C-III Pump)

  1. Disconnect negative battery cable. Drain and remove radiator coolant recovery reservoir. Remove drive belt. Remove power steering pump hose from between power steering pump and power steering pump reservoir.
  2. Using Steering Pump Pulley Remover (T69L-10300-B), remove power steering pump pulley from pump. Disconnect power steering left side pressure hose from pump. Remove 3 pump bolts and remove pump. To install pump, reverse removal procedure. Refill and bleed hydraulic system.
scientia non olet · About LEMON Manuals