LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Probe Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Rotor >> Removal & Installation

Removal & Installation

  1. Remove front wheels. Remove front brake caliper and pads. See FRONT BRAKE CALIPER & PADS  . If caliper does not require service, DO NOT disconnect brake hose from caliper.
  2. Using mechanic's wire, secure caliper out of way. Remove rotor from hub assembly. To install rotor, reverse removal procedure. Bleed brakes (if necessary). See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals