LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Explorer 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal & Installation

Removal & Installation

  1. Disconnect brake warning light indicator wire from indicator switch. With engine off, depress brake pedal to bleed vacuum from brake booster.
  2. Disconnect brakelines at master cylinder. Remove nuts retaining master cylinder to brake booster. Remove master cylinder. To install, reverse removal procedure. Bleed brake system. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals