Post-Collision Air Bag Safety Inspection
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Components |
|---|---|
| Replace After Deployment | * Air Bag Module(s) |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | * All Sensors * Clockspring * Seat Belts * Steering Column * Steering Wheel * Wiring Harness & Connectors |
| Comments | * SRS wiring can be repaired following manufacturer's recommendations. * Inspect and replace any Air Bag system part identified as defective by diagnostic check. * Air Bag modules with damaged or marred deployment covers MUST BE COMPLETELY REPLACED - NOT REPAINTED. |