LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Pedal >> Removal & Installation (Aerostar)

Removal & Installation (Aerostar)

  1. Disconnect master cylinder push rod from clutch pedal. Remove Powertrain Control Module (PCM). Remove retainer clip from pedal shaft. Remove brake and clutch pedal bushings from bracket.
  2. To install, reverse removal procedure. Inspect and lubricate bushings with a light film of SAE 30 engine oil. Replace bushings if worn.
scientia non olet · About LEMON Manuals