CD4E (Contour, Mystique & Probe)
- Raise and support vehicle. Place drain pan under transaxle. Remove transaxle drain plug and drain fluid from transaxle. Install transaxle drain plug.
- Add 5 qts. (4.8L) ATF. Start engine and run at idle for 5 minutes. Shift transmission through all gears during 5 minute time period. Remove transaxle drain plug and drain fluid from transaxle.
- Install transaxle drain plug and tighten to specification. See TORQUE SPECIFICATIONS . Add 5 qts. (4.8L) ATF. Start engine and run through all gears. Check fluid and add as required.