LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Adjustments >> Transmission Range (Tr) Sensor/Switch >> CD4E & C6 & E4OD (Contour, Expedition, Mystique, Pickup & Van)

CD4E & C6 & E4OD (Contour, Expedition, Mystique, Pickup & Van)

  1. Remove nut securing manual control lever to Transmission Range (TR) sensor. Turn manual lever to NEUTRAL position. Loosen bolts securing TR sensor to transaxle. Using Adjuster (T92P-70010-AH), align TR sensor slots. Tighten TR sensor mounting bolts.
  2. Install manual lever retaining nut. Tighten nut to specification. See TORQUE SPECIFICATIONS . Check for PARK engagement. Start engine and ensure that transmission shifts through all gears properly. If not, check shift cable adjustment. See SHIFT CABLE/LINKAGE . Verify that vehicle only starts in PARK and NEUTRAL and that backup light work.
NOTE: 4EAT transaxle uses TR switch instead of TR sensor.
scientia non olet · About LEMON Manuals