4F20E (Villager)

Raise and support vehicle. Loosen lock nut. See Fig 1. Tighten adjusting screw to 35-53 INCH. lbs. (4-6 N.m). Back off adjusting screw 2 1/2 turns. While holding adjusting screw, tighten lock nut to 23-27 ft. lbs. (31-37 N.m).

Fig 1: Adjusting 2-4 Band (4F20E)

Courtesy of FORD MOTOR CO.

CAUTION: DO NOT allow adjustment screw to back out. Band strut could fall inside transmission assembly.