LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation >> Automatic Transmission >> 4F20E Transaxle >> Installation (Villager)

Installation (Villager)

  1. Reverse removal procedure to install. Ensure torque converter is fully seated. Align reference marks on axle shafts.
  2. Tighten all bolts/nuts to specification. See TORQUE SPECIFICATIONS . Fill transaxle with Motorcraft Mercon ATF (XT-2-QDX). For fluid capacity and control cable or linkage adjustment, see TRANSMISSION SERVICING - A/T article.
scientia non olet · About LEMON Manuals