LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Overhaul - 4R44E & 4R55E Automatic Transmission >> On-Vehicle Service >> Transmission Range (Tr) Sensor >> Installation

Transmission Range (Tr) Sensor: Installation

  1. Install TR sensor on manual lever. Install TR sensor bolts finger tight. Rotate manual lever to Neutral position (2 detents rearward). Install TR Sensor Alignment Tool (T93P-70010-A) into 3 slots on TR sensor. Tighten TR sensor bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Install manual control outer lever, tighten nut to specification. Connect electrical connector. Install shift linkage and adjust if necessary.
scientia non olet · About LEMON Manuals