LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Overhaul - 4R44E & 4R55E Automatic Transmission >> On-Vehicle Service >> Extension Housing Seal & Bushing >> Installation

Extension Housing Seal & Bushing: Installation

  1. Using Bushing Installer (T77L-7697-F), install bushing with lube hole at 3 0'clock position. Ensure lube hole in bushing alines with lube groove in extension housing. Using Seal Installer (T74P-77052-A), install seal with drain hole at 6 o'clock position.
  2. Apply multipurpose long-life lubricant to seal lip and drive shaft yoke. Align index marks and install drive shaft. Add fluid as necessary