KOEO Self-Test
Ensure engine is at normal operating temperature. If engine does not start (or stalls after starting), continue KOEO SELF-TEST. DO NOT depress throttle. Turn ignition off. Wait 10 seconds. Ensure test equipment is properly attached. Turn ignition on (engine off). Record all KOEO and Continuous Memory Codes.
If a Code 111 (pass code) is not retrieved in KOEO portion of test, service KOEO codes at this time. Service any engine codes recorded before servicing transmission codes (codes No. 566 and 629). If PCM will not output codes, see appropriate TESTS W/CODES article in ENGINE PERFORMANCE: