LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> Suspension >> Front Suspension - (2WD) >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Bolt Retainer Plate-To-Frame Bolt 10-14 (14-19)
Damper Assembly Bolt 22-29 (30-39)
Flat Plate-To-Frame Bolt 10-14 (14-19)
Front Mounting Bracket-To-Flat Plate Bolt 35-47 (47-64)
Jounce Bumper-To-Frame Bolt 24-33 (33-45)
Lower Control Arm-To-No. 1 Crossmember Bolt (1) 100-140 (136-190)
Mounting Bracket-To-Frame Rail Bolt/Nut 145-195 (197-264)
Rebound Bumper-To-Frame Bolt 15-21 (20-28)
Shock Absorber-To-Lower Control Arm Bolt 20-24 (27-33)
Shock Absorber-To-Upper Spring Seat Stud Nut 25-34 (34-46)
Spindle-To-Lower Ball Joint Nut (2) 80-113 (108-153)
Spindle-To-Upper Ball Joint Nut 27-37 (37-50)
Stabilizer Bar Mounting Bracket-To-Frame Bolt 16-24 (22-33)
Tie Rod End-To-Spindle Arm Nut (2) 52-74 (71-100)
Upper Control Arm-To-Adjusting Arm Nut 70-100 (95-136)
Wheel Lug Nut (3) 100 (136)
INCH Lbs. (N.m) 
Stabilizer Bar-To-Lower Control Arm Nut 71-108 (8-12)
Stabilizer Bar-To-Stabilizer Link Nut 71-108 (8-12)
(1) Tighten to specification with vehicle in normal ride height position and all other fasteners tightened to specification.
(2) Tighten to specification and, if required, advance to next castellation to install cotter pin.
(3) Retighten to specification after 500 miles.