Power Steering Pump & Pulley: Removal
- Disconnect fluid return hose at reservoir and drain fluid. Remove pressure hose and power steering pressure switch (if equipped) from pump. On 3.0L engine, loosen idler pulley adjustment bolts to loosen drive belt tension. On 4.0L engine, lift tensioner pulley in a counterclockwise direction to loosen drive belt tension. Remove belt from under tensioner. On all models, remove drive belt from steering pump pulley.
- Remove pump and adjustment bracket from support bracket. Using Pulley Remover (T69L-10300-B), remove pulley from pump. Remove pump.