LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 4.0L V6 - VIN [X]) >> Removal & Installation >> Intake Manifolds >> Removal (Upper)

Removal (Upper)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Remove air cleaner outlet tube. Remove splash shield to expose throttle linkage. Remove control cable(s) and bracket from throttle body.
  2. Disconnect necessary vacuum hoses. Disconnect necessary wiring harness and ground connections. Remove engine cover. Disconnect heater hose locating bracket and transmission dipstick tube, position aside.
  3. Disconnect spark plug wires and harness connectors from coil pack. Remove coil pack and EGR valve. Remove oil dipstick tube. Remove EGR manifold tube. Remove EGR transducer. Remove upper intake manifold retaining bolts. Remove upper intake manifold and gasket.
scientia non olet · About LEMON Manuals