Connecting Rods Specifications

WARNING: This page is about a different variant/trim than selected.

CONNECTING RODS

Application

In. (mm)

Bore Diameter

Pin Bore

.9217-.9236 (23.411-23.459)

Crankpin Bore

2.2370-2.2378 (56.820-56.840)

Center-To-Center Length

5.7467-5.7494 (145.966-146.035)

Maximum Bend ⁽¹⁾

.0005 (.013)

Maximum Twist ⁽¹⁾

.0015 (.038)

Side Play

Standard

.0036-.0106 (.091-.269)

Service Limit

.014 (.36)

⁽¹⁾	Specification listed is measured at the ends of an 8" (203 mm) bar, 4" (102 mm) on each side of rod center line.