Camshaft Specifications
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application | In. (mm) | |
|---|---|---|
| Camshaft Bearing I.D. | ||
| No. 1 | 1.951-1.952 (49.56-49.58) | |
| No. 2 | 1.937-1.938 (49.20-49.23) | |
| No. 3 | 1.922-1.923 (48.82-48.84) | |
| No. 4 | 1.907-1.908 (48.44-48.46) | |
| End Play | .002-.013 (.051-.318) | |
| Journal Runout | .005 (.13) | |
| Lobe Lift Wear Limit | .005 (.13) | |
| Oil Clearance | ||
| Standard | .0010-.0026 (.025-.066) | |
| Service Limit | .006 (.15) | |
| Valve Lift | .4024 (10.220) | |