Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Axle Shaft-To-Drive Axle Flange Bolt |
22-30 (30-40) |
| Bolt Retainer Bracket Bolt |
10-14 (14-19) |
| Bumper-To-Crossmember Bolt |
24-33 (33-45) |
| Damper-To-Control Arm Bolt |
22-29 (30-39) |
| Hub Nut |
170-210 (230-285) |
| Lower Ball Joint Nut |
59-81 (80-110) |
| Mount Plate-To-Frame Rail Bolt |
10-14 (14-19) |
| Pivot Bolt |
100-140 (136-190) |
| Shock Absorber |
| Lower Bolt/Nut |
16-24 (22-33) |
| Upper Nut |
25-35 (34-47) |
| Stabilizer Bar Mount Bracket Bolt |
16-24 (22-33) |
| Tie Rod-To-Steering Knuckle Nut |
52-74 (71-100) |
| Upper Ball Joint Clamp Bolt/Nut |
27-37 (37-50) |
| Upper Control Arm Front Mount Bracket-To-Mount Plate Bolt |
35-47 (47-64) |
| Upper Control Arm Mount Bracket-To-Frame Rail Bolt |
145-195 (197-264) |
| Upper Control Arm-To-Adjusting Arm Nut |
70-100 (95-136) |
| Wheel Lug Nut |
100 (136) |
| INCH Lbs. (N.m) |
| Stabilizer Bar Link Nut |
71-107 (8-12) |