LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls - Remove/Install/Overhaul - 4.0L) >> Fuel System >> Heated Oxygen Sensor (Ho2S) >> Installation

Heated Oxygen Sensor (Ho2S): Installation

WARNING: This page is about a different variant/trim than selected.

When replacing HO2S, coat threads with anti-seize compound before installation. New sensors should already have this compound applied to threads. Install HO2S sensor. Reconnect wiring connector to HO2S. Reconnect negative battery terminal.

scientia non olet · About LEMON Manuals