LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Controls - System/Component Tests - 2.3L) >> Emission Systems & Sub-Systems >> Positive Crankcase Ventilation (PCV) >> System Inspection

System Inspection

WARNING: This page is about a different car, the 1995 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm engine to normal operating temperature, and operate it at idle. Disconnect Positive Crankcase Ventilation (PCV) valve, together with vent hose, from valve cover. Block PCV valve opening and check for vacuum. If no vacuum is felt, check for collapsed line and blockage.
  2. Note direction of valve installation. Remove PCV valve. Blow air into upper port of valve. Air should flow through valve from lower port. Blow air through lower port of valve. Air should not flow from upper port. Replace valve as necessary.
scientia non olet · About LEMON Manuals