New Generation STAR (NGS) Tester
WARNING: This page is about a different car, the 1995 Mazda B4000, 1995 Mazda B3000, and 1995 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition switch to OFF position. Insert appropriate vehicle interface module and program card into NGS tester. Connect NGS OBD-II adapter cable connector to NGS tester. Connect 5-pin connector of adapter cable to Data Link Connector-2 (DLC-2). See Figure . Plug NGS tester power cable into cigarette lighter or use battery hook-up adapter. Listen for double beep sound and go to KOEO SELF-TEST.