Automatic Transmission Removal & Installation - Automatic Transmission (4R44E/5R55E): Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Mercury Mountaineer, 1998 Ford Ranger, 1998 Ford Explorer, 1997 Ford Ranger, and 1997 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Use NEW "O" ring on filler tube. Ensure torque converter is fully seated. Align reference marks on drive shaft and axle flange or yoke.
- Tighten torque converter drain plug and all bolts/nuts to specification. See TORQUE SPECIFICATIONS . Fill transaxle with appropriate transmission fluid. For fluid type, capacity and control cable or linkage adjustment, see the TRANSMISSION SERVICING - A/T article.