Timing Chain Cover: Installation

WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Clean timing chain cover mating surfaces. Apply sealing compound to gasket surfaces. Place NEW timing chain cover gasket into position. Replace crankshaft seal. Position timing chain cover on engine. Insert bolts in their original location.
Tighten bolts to specification. See TORQUE SPECIFICATIONS table. Apply silicone sealer to crankshaft keyway. To complete installation, reverse removal procedure. Install oil pan. See OIL PAN . Fill or top off all fluids. Fill and bleed air from cooling system. See COOLING SYSTEM BLEEDING .