LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine - 4.0L V6 - VIN [X]) >> Removal & Installation >> CMP Synchronizer

CMP Synchronizer

WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Special tool and procedure are required to properly install camshaft position sensor synchronizer. Failure to do so during installation will cause fuel injection to be out of time and may cause engine damage.

For removal and installation procedures, see:

  1. 1996 Explorer

    REMOVE/INSTALL/OVERHAUL - 4.0L article in ENGINE PERFORMANCE

  2. 1997 Explorer & Mountaineer

    REMOVE/INSTALL/OVERHAUL - 4.0L article in ENGINE PERFORMANCE

  3. 1996 Ranger

    REMOVE/INSTALL/OVERHAUL - 4.0L article in ENGINE PERFORMANCE

  4. 1997 Ranger

    REMOVE/INSTALL/OVERHAUL - 4.0L article in ENGINE PERFORMANCE

scientia non olet · About LEMON Manuals