LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine - 4.0L V6 - VIN [X]) >> Overhaul >> Cylinder Head >> Valves

Cylinder Head: Valves

WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Grind valve face to 44° angle. Ensure head diameter, valve face runout, stem diameter and valve margin are within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.
  2. Oversize valves are available in .008" (.20 mm) and .016" (.41 mm). When servicing valve stem tip, DO NOT remove more than .010" (.25) from end of valve stem.
scientia non olet · About LEMON Manuals