LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine - 4.0L V6 - VIN [X]) >> Overhaul >> Cylinder Block Assembly >> Piston & Rod Assembly

Piston & Rod Assembly

WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Ensure pistons and rods are installed in cylinder from which they were removed. Note direction of connecting rod installation on piston before removal. Ensure arrow on piston dome is facing front of engine, and connecting rod oil squirt hole is pointed toward center of engine. See Figure.

scientia non olet · About LEMON Manuals