Cylinder Block Assembly: Notes
WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Beginning 5/13/96, all connecting rod assemblies were redesigned using torque-to-yield fasteners. Whenever servicing, it must be determined which assembly is used. See Figure. Assemblies 7AC or 7AE are torque-to-yield. Assemblies with 7AD are not torque-to-yield. If replacement of a 7AD rod assembly is necessary, all 6 rod assemblies MUST be replaced.