Cylinder Block Specifications

WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

3.9527-3.9543 (100.398-100.439)

Maximum Taper

.010 (.25)

Maximum Out-Of-Round

Standard

.0015 (.038)

Service Limit

.005 (.13)

Maximum Deck Warpage

⁽¹⁾

⁽¹⁾	.003" (.08mm) within a 6" (152 mm) area or .006" (.15 mm) overall.